تفاصيل

Ceiling metal T bar frame roll forming machine

        Ceiling metal T bar frame roll forming machine is used to make ceiling T-bar.The T-bar is a technical profile forsupporting suspended ceiling panels (cell grid suspended ceiling).This highly technical system consists of two different profileswhich called Main Tee and Cross Tee.A galvanized sheet metal base gives structure and strength to the profile, but all that can beseen once the ceiling is assembled is a pre-painted sheet metal profile. Special machining and hooks or connectors are to be foundon the profile body and the ends, which allow the profiles to be fastened to the ceiling and to each other.These materials arewidely used in the buildings now,such as office building and schools, etc.

1. Here are some profile drawings for your reference:

2.Here are some normal T sizes for your reference:

38H Model: 

I) Main tee: 38mm x 24mm x 3.0m, or 3.05m, 3.60m, 3.66m

Ii) Cross tee: 26mm x 24mm x 1.2m, or 1.22m

Iii) Cross tee: 26mm x 24mm x 0.6m, or 0.61m

Iv) Wall angle: 20mm x 20mm x 3.05m, or 3.60m 22mm x 22mm x 3.05m, or 3.60m  24 mm x 24mm x 3.05m, or 3.60m

V) Thickness: From 0.23mm, 0.25mm, 0.28mm, to 0.30mm and 0.40mm

3. Product Process of metal framing for drywall ceiling roll forming machine：

Decoiler--Feeding--Roll forming--Punching(if need holes or logo)--Cutting--Product table

4. Main parameters of metal framing for drywall ceiling roll forming machine:

1. Dimension: 10000*1000*1500mm

2. Weight: 8T

3. Total power: 11KW

4. Voltage: 380V/50HZ/3PH

5. Material: GI,GL

6. Forming speed: 25m/min

7. Material thickness: 0.2-0.6mm

8. Tolerance: ±1mm

5.Main pictures of metal framing for drywall ceiling roll forming machine: